Your carbide has a number in Baddi.
We show you how we get it.
Every worn insert, broken drill and dead die in your bin carries tungsten. Most buyers quote a flat rate off a WhatsApp photo and move on. We weigh it in front of you, grade it by carbide content, and show the math before we pay — same visit.
2018
MON–SAT
50 KG
SAME VISIT
What actually sets your price
Solid inserts vs. mixed scrap
A clean indexable insert or solid end mill is close to pure tungsten carbide. Grinding sludge, swarf and mixed tool-room floor sweep run lower — they’re priced as a separate lot, not blended into your clean material’s rate.
The metal holding it together
Cutting-grade carbide is commonly bonded with roughly 6–12% cobalt. Cobalt has its own market value, so grade matters — a die or punch with a different binder ratio doesn’t price the same as a drill insert.
Steel shanks and coating
Brazed tooling — a carbide tip on a steel shank — is weighed, then the recoverable carbide is separated and priced on its own. We show you that split on the ticket, not after you’ve left.
How the price actually moves week to week
Tungsten carbide scrap isn’t priced off a fixed local rate card the way ordinary steel scrap often is. The tungsten content in your inserts, drills, or dies has its own international market — tracked through tungsten concentrate and APT (ammonium paratungstate) pricing — and that market moves independently of what’s happening in the Indian steel scrap trade. When APT prices move internationally, the rate we can offer for carbide scrap moves within days, sometimes before local competitors have adjusted.
This is also why a flat “₹X per kg for all carbide” quote from a generic scrap dealer should make you cautious. It usually means one of two things: either they’re not actually grading your material by tungsten and cobalt content, or they’re not tracking the international market closely enough to know what the material is worth this week. We reassess our rate against the international market most weekdays — the same discipline behind WolfTrack, our tungsten market intelligence desk that publishes a weekly price brief and India’s transaction price index for traders and volume buyers who track this market rather than sell into it once.
Know what's in your bin before you call
| Typical density | ~14–15 g/cm³ |
| Feel | Heavier than its size suggests |
| Magnetic response | Weak to slight |
| Colour | Grey to grey-black, matte finish |
| Common binder | Cobalt, ~6–12% by grade |
- Indexable inserts & tipsThe most common lot we see, from CNC, VMC and lathe tooling. Small, uniform pieces with minimal contamination — usually the highest per-kg value in a mixed lot.
- Solid carbide rods, drills & end millsFull-carbide construction with no steel or binder to separate — priced highest per kg of any form we buy. Broken or worn drill bits and end mills from a tool room fall here.
- Brazed tool bitsA carbide tip brazed onto a steel shank, common in lathe and shaping tools. We separate the carbide from the steel on-site before weighing either component.
- Dies, punches & rock-drill buttonsDenser, heavier-duty forms used in stamping, forming and drilling. Graded the same way as smaller tooling — by content, not by assumption.
HSS (High Speed Steel) tool scrap
Not everything worn out in your tool room is carbide. High Speed Steel tooling is a different alloy family entirely — fully magnetic, no tungsten-carbide/cobalt binder — and it’s priced against its own tool-steel and alloy content, not the tungsten carbide rate. We buy both, graded and priced separately on the same visit.
- M2General-purpose HSS — the most common grade in drills, taps and milling cutters.
- M35Cobalt-enhanced (~5% Co) for tougher cutting jobs — common in industrial-grade drill bits.
- M42High-cobalt (~8% Co) grade for heat resistance — found in premium taps and hobs.
- T15Tungsten-type HSS with high vanadium — wear-resistant, used in heavy-duty broaches.
- Drill bits, taps & reamersBroken or worn-out sets from a tool room floor — the most common HSS lot.
- Milling cutters & hobsSolid HSS or with a carbide insert — we separate and price each material.
- Lathe & planer tool bitsSolid HSS blanks, ground or unground.
- Slitting saws & broachesHeavier HSS forms, priced by weight and grade.
A quick way to tell them apart before you call: HSS responds strongly to a magnet and sounds like ordinary steel when tapped; carbide is only weakly magnetic and feels noticeably heavier for its size, with a duller, denser tap. If you’re not sure, bring both — we sort and price each on-site, no guesswork on your end.
Where we pick up, and why
Why sell here instead of shipping it to Chandigarh or Delhi
Carbide scrap is dense and low-volume relative to its value, which makes it tempting to think a Chandigarh or Delhi dealer’s quoted rate is worth the drive down the Pinjore–Baddi road, or further. In practice, three things usually erase that difference: transport cost and risk on a dense material that’s easy to shortweight in transit, a re-weighing dispute at the far end that you can’t contest in person, and a multi-day payment cycle instead of same-visit settlement. Weighing and grading in front of you, at your gate, removes all three variables — the number you see is the number you get paid, the same day.
Four steps, one visit
01
Call or WhatsApp
02
Weighed on-site
03
Graded and priced
04
Paid on the spot
Before you call
WolfTrack — India's tungsten price desk
Run a scrap trading business yourself?
Buying carbide scrap in Baddi since 2018
The operating model hasn’t changed since we started: weigh on-site, grade by actual tungsten and cobalt content, show the math, pay before the material leaves your premises. No back-room weighing, no take-it-or-leave-it flat rate. The same pricing discipline — tracking the international tungsten market rather than holding a rate flat for months — is what now feeds WolfTrack’s weekly price brief and India’s tungsten transaction price index.
Weigh it before you sell it anywhere else.
Other cities we buy carbide & HSS scrap in
Prices are indicative and confirmed on weighing — call for today’s rate